<a href="https://solderstick.com/products/t-tap-quick-connection-terminals/">BEST T-Tap Wire Connectors</a>

T-Tap Wire Connectors, 120Pcs 18-14AWG Insulated Male Quick Disconnect Terminals Quick Splice Electrical Connector Kit with Storage Case

About this thing
Simple TO ANY WIRE - T-Tap wire Connectors will take advantage of any wire without expecting to cut, strip or weld. Mid range wiretapping has never been more straightforward.

THICKER TINNED COPPER CONTACTS - Thicker tinned copper contacts won't twist in any event, while taking advantage of thicker wires. Protection male detaches have been intended to lock firmly on the T-Tap connectors to forestall sliding out. Safe design and keeps the wire from shorting out.

T-TAP WIRE CONNECTOR-T-Tap wire connector is a part of copper which conducts power well. It's thick tinned to forestall consumption and opposes as high temperature as 221℉.

WIDE APPLICATIONS - 60 PCS T-Tap Wire Connectors + 60 PCS Male Quick Disconnects will keep going for quite some time projects. Marine, auto, logical, home wiring projects.The ​connector pack will permit you to rapidly take advantage of any wire in any application. The connector incorporates blue (AWG 16 - 14) T-TAP connectors that can be utilized on wire AWG from 22 to 12.
Quality Commitment - We are exceptionally positive about item quality. In the event that you are not happy with the item, you can reach us and we give after-deals administration.

Item Description

Material: PVC + Copper, Plating Tin

Shading: Blue


Tap into any wire with simple.

Permits creating associations between wires that can be associated and separate.

The centers are made of genuine tinned copper for greatest conductivity and the most grounded creases.

Speedy Splice Connector:

Blue: 60 PCS T-Tap Wire Connectors + 60 PCS Male Quick
Detaches A.W.G 16-14 - Wire range (1.5-2.5mm²).

The most effective method to Use

1.Put the wire in the connector.
2.Use the forceps to crease the connector over the wire. Press the connector together until it locks.
3.Insert the wire into the spade, and crease it down to get the wire.
4.Plug the spade terminal straightforwardly into the tap connector.Now you have a protected and protected association